Blog
September 4, 2023
The spray lay-up technique can be said to be an extension of the hand lay-up method. In this technique, a spray gun is used to spray […]
August 28, 2023
What is Fiber Reinforced Plastics? FRP is a composite made up of thermosetting resins and fiberglass, which is very thin fibers of glass, hence the name. […]
August 21, 2023
The pultrusion process allows the continuous production of FRP structural shapes in an automated, energy-efficient process by pulling fiberglass rovings through a resin bath or resin […]
August 14, 2023
The ever increasing emission of green house gases is showing far reaching impact on the blue planet Due to the impact of global warming, glaciers and […]
June 23, 2023
A vinyl ester resin has excellent chemical resistance, hydrolytic stability and higher heat resistance. Hence, they are used in areas and applications exposed to the high […]
June 23, 2023
A clean mould surface is essential for all sealers and release products, allowing them to wet the mould surface evenly and completely when applied. Your final […]
June 23, 2023
A typical resin has medium viscosity while the gelcoat is a material of higher viscosity. A gelcoat is normally 3 times more thixotropic than a typical […]
June 23, 2023
The alkyd resins belong to the family of thermosetting polyesters, organic macromolecules obtained through the reaction between an acid or an anhydride, an alcohol and a […]
May 13, 2023
Resin, any natural or synthetic organic compound consisting of a non crystalline or viscous liquid substance. Resins are broadly classified as – Natural resins are typically […]
May 13, 2023
Curing is the process of becoming hard or solid by cooling or drying or crystallization. Synonyms: hardening, set, solidification, solidifying. Cured resin and gel coat means […]
Life at Orson
Contact Info
Call On:
+91 7303050028
For Product Enquiries,
contact us at
sales@orcpl.com
Raw Material Suppliers,
contact us at
purchase@orcpl.com
Orson Resins and Coatings Private Limited is a reputed manufacturer of polyester resins for composites, paints and coating industry since 1998.
Headquarters Address:
B-413, Kanakia Western Edge II, Western Express Highway,
Behind Metro Store, Borivali (E), Mumbai – 400066
Manufacturing Locations:
Wada Unit:
Gut No.398, Kondley Road, At Post – Dinkarpada (Kudus), Taluka – Wada, Thane, Mumbai, Maharashtra – 421312, India
Silvassa Unit:
Plot No 13, S. No 46/1 of Village, Athal, Silvassa, Dadra and Nagar Haveli – 396230, India